Your basket
Husky 100kg Soft Stop
for sliding wood or metal doors to 100kg
- to be used in conjunction with a Husky 100 sliding door kit purchased separately
- for use on the opening and closing side of wood and metal sliding doors
- the soft stop damper catches the door and draws it into the open or closed position for the last 130mm of travel
- not suitable for doors less than 25kg
- convenient and installer-friendly, with no special tooling required
- high quality, hydraulic damper is at the key of the system, tested to BS EN1527 that will work maintenance-free throughout its lifetime
- single kit - soft stop on one end only (can be installed on either the open or closed side)
- double kit - soft stop on both ends (operation on both open and closed side), two kits are required
- designed to be installed in new installations or retro-fitted to a current Husky application
Maximum door weight: 100kg
Minimum door weight: 25kg
Door width: Single damper installation - Minimum door width - 716mm
Double damper installation - Minimum door width - 1078mm
Door thickness: 20-50mm
Newton force required to prime the damper - 48N
Kits
100kg soft stop kit includes:
- one damper
- one soft stop block
- one soft stop hook
- one soft stop hook block
- all fixings required for the kit
The kit is universal either for closed or open positions, so for double applications for open and close damping order two kits.
Required extras:
- 2 nylon-bodied needle roller-bearing 4-wheel hangers (284)
- Steel (280); Aluminium mill finish (281A); or Aluminium anodised finish (280AN) track
Optional extras:
See Husky 100 datasheet for full optional extra information