Your basket
Husky 50kg Soft Stop
for sliding wood or metal doors to 50kg
- can be used on the opening and closing side of wood and metal sliding doors
- the soft stop damper catches the door and draws it into the open or closed position for the last 110mm of travel
- not suitable for doors less than 25kg
- convenient and installer-friendly, with no special tools required
- high quality, hydraulic damper is at the key of the system, tested to BS EN1527 that will work maintenance-free throughout its lifetime
- single kit - soft stop on one end only (can be installed on either the open or closed side)
- double kit - soft stop on both ends (operation on both open and closed side), two kits are required
- designed to be installed in new installations or retro-fitted to a current Husky application
Maximum door weight: 50kg
Minimum door weight: 25kg
Door width: Single damper installation - Minimum door width - 726mm
Double damper installation - Minimum door width - 1020mm (not available on pocket door)
Door thickness: 20-50mm
Newton force required to prime the damper - 30N
Kits
Soft50 - single Husky 50kg soft stop kit includes:
- one damper
- one soft stop block
- left hand and right hand aluminium soft stop brackets*
- all fixings required for the kit
*Installer will select one of the brackets provided depending on whether the operation required is closing or opening.
Soft50D - double Husky 50kg soft stop kit includes:
- two dampers
- two soft stop blocks
- left hand and right hand aluminium soft stop brackets
- all fixings required for the kit
Required extras:
- 2 nylon-bodied needle roller-bearing 4-wheel hangers (284)
- Steel (280); Aluminium mill finish (281A); or Aluminium anodised finish (280AN) track
Optional extras:
See Husky 50 datasheet for full optional extra information