External Handle 64mm
An external handle for P C Henderson steel garage doors that were originally supplied without a fascia plate. This includes models Merlin, Victoria and Doric and were manufactured after 1992. This handle will replace the original 'T' shaped handle with the updated lozenge shape.
SKU:
002294
Excl VAT
£13.84
This garage door spares product from P C Henderson has the following benefits:
- Genuine P C Henderson Spare Part
- Supplied as one lozenge shaped handle
- Supplied in P C Henderson branded packaging
- Installation instructions supplied
- Suitable for doors manufactured after 1992
How do I know if my P C Henderson garage door was manufactured after 1992?
Doors manufactured before 1992 featured a metal handle. Garage doors manufactured by P C Henderson post 1992 featured a moulded grey handle.
More Information
| SKU | 002294 |
|---|---|
| Fire Rated (Yes/No) | No |
| Colour | Grey |
| Door Material | Metal |
| Situation | Exterior |
| Application | Residential |
Q&A
Q&A
Question:
hi, where is the 64mm dimension measured across?
Also my euro lock door appears to missing a face plate, drilling approximately 50mm x 30mm, are these availble still?
Also my euro lock door appears to missing a face plate, drilling approximately 50mm x 30mm, are these availble still?
Question by: alan on 18 Sept 2025, 08:13
Answer:
Good morning,
The length is measured from the back of the plastic collar of the handle (the exposed part of the shaft) The “face plate” will be the plastic fascia plate but we no longer supply them. Usually doors with the fascia plate have the 69.5mm shaft however if you are fitting the handle without a fascia plate then the 64mm will be better suited to sit tight against the door panel.
Thanks
P C Henerson
The length is measured from the back of the plastic collar of the handle (the exposed part of the shaft) The “face plate” will be the plastic fascia plate but we no longer supply them. Usually doors with the fascia plate have the 69.5mm shaft however if you are fitting the handle without a fascia plate then the 64mm will be better suited to sit tight against the door panel.
Thanks
P C Henerson
Answer by: Kate Donkin (Admin) on 18 Sept 2025, 11:01
Question:
Do you have an altogether barrel & both locks ( inside & outside?
Question by: Mrs Ward on 19 Jun 2025, 10:55
Answer:
Good morning,
We do not have a kit together but we can supply them all separately - please see links below.
https://www.pchenderson.com/external-handle-64mm/
https://www.pchenderson.com/55mm-euro-profile-lock-cylinder/
https://www.pchenderson.com/lock-body/
Thanks,
P C Henderson
We do not have a kit together but we can supply them all separately - please see links below.
https://www.pchenderson.com/external-handle-64mm/
https://www.pchenderson.com/55mm-euro-profile-lock-cylinder/
https://www.pchenderson.com/lock-body/
Thanks,
P C Henderson
Answer by: Kate Donkin (Admin) on 19 Jun 2025, 15:00