Fire rated jamb kit for use with single door Pocket Door Pro - certified to FD30 and FD60 standards
- Fire rated jamb kit for single doors
- To be purchased in addition to x1 Pocket Door Pro kit
- Fully certified to FD30 and FD60 standards
- For use with certified fire doors only
- Available with self closing or non self closing options
- Available for 120mm or 125mm finished wall thickness' (plus 12.5mm additional fire rated board either side, bringing total to 145mm or 150mm)
- Manufactured using FDC Finger Jointed Laminated Redwood and complete with intumescent seals
This product is a fire rated jamb kit for single doors to be specified with
Pocket Door Pro. Certified to FD30 and FD60 standards, the kit comes complete with intumescent seals and is made out of FDC Finger Jointed Laminated Redwood. The process of finger jointing, combined with a laminated finish, means that the wood is knot and defect free and delivers significantly better product reliability over time.
Important Note: This product contains the fire rated jamb kit only. A Pocket Door Pro sliding door hardware kit
must be purchased in addition to this system, visit the product page
here. If purchasing a self closing jamb kit, please specify this product with a Pocket Door Pro Soft Close Kit.
Versatile Fire Rated Pocket Door System
When used with
Pocket Door Pro, this system caters for doors up to 930mm wide and 2315mm high, 120mm or 125mm finished wall thickness' and self-closing or non self-closing applications. Please consult your building inspector prior to purchase to determine if your application requires a self closer.
Easy Installation
To help make the installation process easier, we have created a handy video to guide you through the process. Watch the video at the bottom of the page.
Certification
The FD30 system has been independently tested and certified by Warrington Fire to BS 476:Part22:1987 and BS EN 1634-1:2014+A1:2018 standards (report numbers 399104 and 413105). The FD60 system has been tested to BS 476:Part22:1987 standards (report number 399097). Systems should be fitted with a solid core FD30 or FD60 timber based fire door. For further information please contact P C Henderson.
Handles and Flush Pulls
This system can be used with our
144 and
385 sliding door handles. Please follow the field of application report for specific fire rated installation guidelines, view the field of application report at the bottom of the page.