Huskyfold 30 Bifold Door Kit - All Questions

Huskyfold 30 Bifold Door Kit

SKU

Huskyfold 30

Question:

Can the Huskyfold 30 track be side mounted? I'd like to side mount it to the bottom edge of a beam.

Question by: Matt Piercy on 29 Oct 2024, 16:40

Answer:

Good morning,

Yes - this is possible. You would need to purchase our 281HP wall brackets in addition to the Huskyfold 30 kit to achieve this.

Thanks,
P C Henderson

Answer by: Kate Donkin (Admin) on 30 Oct 2024, 09:16

Question:

Hi could I have my track cut to size? 3060

Question by: Mark on 27 Mar 2025, 07:23

Answer:

Good morning,

Our Huskyfold 30 track can be cut to size to suit your installation - full instructions on how to do this are included in our fitting instructions.

Many thanks,
P C Henderson

Answer by: Kate Donkin (Admin) on 28 Mar 2025, 08:25

Question:

May i use Ikea door 19mm thinkness?

Question by: Lucia on 1 Apr 2025, 18:06

Answer:

Good morning,

Yes - that will be fine with this system.

Thanks,
P C Henderson

Answer by: Kate Donkin (Admin) on 2 Apr 2025, 11:35

Question:

I have a bifold with 3 doors although I’m not sure which configuration I need, 3+0 or 2+1. How do I work this out?

Question by: David Knight on 18 Jun 2025, 09:26

Answer:

Good morning,

This is down to personal preference of having all 3 doors folding to one side of the opening or having 2 doors folding to one side with a swing door on the other. The finishes opening width for both configurations can be found in our fitting instructions within 'documents' (this depends on your door width and thickness).

Many thanks,
P C Henderson

Answer by: Kate Donkin (Admin) on 19 Jun 2025, 08:39

Question:

Where it says the max door weight is 30kg does that refer to the total weight of all doors? I am looking to fix 3 glazed doors from Wickes, but the weight of each door is 19.3kg. Is this track appropriate?

Question by: Anton on 9 Nov 2025, 22:25

Answer:

Good morning,

The maximum door weight refers to each panel so this system will be fine for the doors you intend to use.

Thanks,
P C Henderson

Answer by: Kate Donkin (Admin) on 10 Nov 2025, 08:28

Question:

The gap between doors at hinges reduced the gap to 2mm is great and as you state this reduces noise transfer etc HOWEVER, what of the 10mm gap at base of door?!!
How can you reduce this gap??

Question by: D.A. on 1 Dec 2025, 19:21