Lock Body
A lock body for use with garage doors that have two or four point latch locking and slam latches.
This replacement is a compatible product and is suitable for any door with plastic locking rods and is not spring loaded. Please Note: the first image shown is the original lock body for identification purposes only. You will receive a replacement lock body that will not look identical to the original, but will function in the same way.
SKU:
280014
Excl VAT
£31.45
This garage door spares product from P C Henderson has the following benefits:
- Genuine P C Henderson approved compliant part
- Supplied as one lock body
- Suitable for use with two and four latch locking and slam latches
- To be used with garage doors what have plastic locking rods
Why choose P C Henderson garage door spares?
P C Henderson has maintained a reputation for quality garage doors and garage door spares for decades. From its manufacturing centre in County Durham, all parts undergo strict quality assurance testing.
More Information
| Fire Rated (Yes/No) | No |
|---|---|
| Situation | Exterior |
| Application | Residential |
Q&A
Q&A
Question:
i have an original garage lock body and i was trying to change the lock however it came apart. i don't know if I have all the pieces. please could you send me a picture of the inside of the lock. Thank you.
Question by: parvinder kaur on 13 Sep 2024, 19:41
Answer:
Good afternoon,
Thank you for your enquiry. I have emailed over an image of our garage lock body.
Thanks
P C Henderson
Thank you for your enquiry. I have emailed over an image of our garage lock body.
Thanks
P C Henderson
Answer by: Kate Donkin (Admin) on 16 Sep 2024, 12:44
Question:
On my garage door, when it is shut and both locking rods are clicked into place, I have to jiggle the handle (whether internal or external) quite a lot until I hear a slight click inside the lock box. Only then can I lock it (either with the key on the external side, or by pushing over the button on the internal side). Is this a problem with the lock body or the lock barrel?
Question by: JT on 15 Nov 2024, 11:44
Answer:
Good morning,
It is difficult to say as either the lock body or the lock cylinder could be at fault. A local garage door specialist may be able to look at it and advise further and or repair / replace for you.
Thanks,
P C Henderosn
It is difficult to say as either the lock body or the lock cylinder could be at fault. A local garage door specialist may be able to look at it and advise further and or repair / replace for you.
Thanks,
P C Henderosn
Answer by: Kate Donkin (Admin) on 18 Nov 2024, 08:56
Question:
Can I buy lock body SKU 280014 directly in your Bath distributor (Power Fixings Bristol) ? Is it available and I can go to pick it up on tomorrow ?
Question by: L Cheung on 1 Dec 2024, 16:15
Answer:
Good morning,
Unfortunately we have no stockists for our garage door spares. You can purchase our 280014 from Jewsons who can order on your behalf but they do not stock it so there would be a leadtime for this. The quickest way is to order via our website.
Thanks,
P C Henderson
Unfortunately we have no stockists for our garage door spares. You can purchase our 280014 from Jewsons who can order on your behalf but they do not stock it so there would be a leadtime for this. The quickest way is to order via our website.
Thanks,
P C Henderson
Answer by: Kate Donkin (Admin) on 2 Dec 2024, 10:30
Question:
Can I obtain a new barrel for a garage door lock? Both keys lost so can only operate from inside! Photo of lock inside and if required to match
Question by: John de Vial on 2 Sep 2024, 13:24
Answer:
Good morning,
Yes part number 032033 is the lock barrel for metal doors.
Thanks,
P C Henderson
Yes part number 032033 is the lock barrel for metal doors.
Thanks,
P C Henderson
Answer by: Kate Donkin (Admin) on 5 Sep 2024, 12:19
Answer:
Good morning,
Yes part number 032033 is the lock barrel for metal doors.
Thanks,
P C Henderson
Yes part number 032033 is the lock barrel for metal doors.
Thanks,
P C Henderson
Answer by: Kate Donkin (Admin) on 5 Sep 2024, 12:20