Jamb Kit for Pocket Door Pro (for single and bi-parting doors)

Jamb Kit to be used in conjunction with Pocket Door Pro and Evolve Pocket Door Pro

  • To be used in conjunction with Pocket Door Pro and Evolve Pocket Door Pro sliding systems
  • Available for single and bi-parting doors
  • Unfinished and paint ready
  • Includes brush strips and acoustic seals
  • Creates a professional finish
  • Available for 120mm and 125mm finished wall thickness'
  • Easy to install

Professional Finish

To be used in conjunction with Pocket Door Pro and Evolve Pocket Door Pro systems, our jamb kit fixes to the pocket door frame to cover the surrounding edges, creating a professional finish. The kit is available for single and bi-parting doors and comes complete with a timber liner, acoustic seals and brush strips.

 

High Quality

Our pocket door jamb kit is manufactured from FDC Finger Jointed Laminated Redwood. The process of finger jointing, combined with a laminated finish, means the wood is knot and defect free – delivering a significantly better product reliability over time. The kit is unfinished and ready for painting to suit your application.

 

Easy Installation

Available for 120mm and 125mm finished wall thicknesses, our jamb kit is easy to install – view our handy installation video below.

 

Architrave Free

For a flush and minimalistic finish, simply install the 12.5mm plasterboard against the jamb kit.

 

NOTE: If purchasing a self closing system for use with a single Pocket Door Pro – a jamb kit is already included with this product.

 

DELIVERY: Some of our jamb kits are experiencing a longer lead time than our standard 2-3 days due to high demand, a delivery date will be provided upon order confirmation.

Quantity:

Clear

Alternatively, order direct on: 0191 377 7345 or Contact Us

Kit Short CodeDoor TypeFinished Wall Thickness
LK/120Single Door120mm
LK/125Single Door125mm
BILK/120Bi-parting Doors120mm
BILK/125Bi-parting Doors125mm
Kit Short CodeDoor TypeFinished Wall Thickness
LK/120Single Door120mm
Kit Short CodeDoor TypeFinished Wall Thickness
LK/125Single Door125mm
Kit Short CodeDoor TypeFinished Wall Thickness
BILK/120Bi-parting Doors120mm
Kit Short CodeDoor TypeFinished Wall Thickness
BILK/125Bi-parting Doors125mm

No optional extras are available.

No optional extras are available.

No optional extras are available.

No optional extras are available.

No optional extras are available.

    Hello, I am looking to use the PDKPRO 07 kit for a 125mm wall thickness, with the Jamb/Liner Kit. I have downloaded the available information for both products. I would like to know if you have a diagram showing dimensions for the components of the Jamb/Liner Kit? Specifically the jamb upright where the closed door rests. I would like to know how far into the jamb the door will sit? Many Thanks
  1. Q Hello, I am looking to use the PDKPRO 07 kit for a 125mm wall thickness, with the Jamb/Liner Kit....... Read more answer now
    Asked on September 28, 2021 9:10 pm
    A

    Hello, 

    Unfortunately we do not have a drawing for the jamb kits. If you want to give us a call and advise exactly the dimensions you need then Richard in our technical department can go and take measurements for you. You can contact us on 0191 3777345. 

    Regards,

    John 

  2. Could this jamb kit be used on pkd 3 frame?
  3. Q Could this jamb kit be used on pkd 3 frame? answer now
    Asked on February 27, 2021 7:42 pm
    A Hi Mark, This jamb kit can only be used with our Pocket Door Pro system - we don't currently offer a jamb kit for our standard Pocket Door system. Many thanks Stephanie Marketing Manager
  4. I have purchased two kits and have double pocket door system. How do you then line them after attaching the plasterboard?
  5. Q I have purchased two kits and have double pocket door system. How do you then line them after att...... Read more answer now
    Asked on January 17, 2021 10:01 pm
    A

    Good morning, 

    The liner kit should be installed prior to installation of the plasterboard. 

    If you need any further installation advice, please contact our sales team on 0191 377 7345 and they will be happy to help. 

    Thanks, 

    Kate 

    Marketing Executive

  6. Do you supply the product LK 120 to suit a double pocket door scenario. Only you recommend using two kits to form a pair of sliding pocket doors. The LK 120 lining is designed for a single door, thus the head fillets would not be long enough. I\'m currently quoting for a customer, so an early response would be most appreciated?
  7. Q Do you supply the product LK 120 to suit a double pocket door scenario. Only you recommend using ...... Read more answer now
    Asked on October 23, 2020 9:11 am
    A

    Good afternoon,

    Our LK/120 is designed for single doors however the header included in the kit is long enough to cater for biparting doors.

    We are currently developing a liner kit for double pocket door applications which is due to be launched later this year.

    Many thanks,
    Kate

    Marketing Assistant

Send me a notification for each new answer.