Retractable Door Springs 7'0" High Door - All Questions

Retractable Door Springs 7'0" High Door

SKU

280007

Question:

I have Henderson Ultra Double Door 14x7ft on which the springs need to be replaced, manufactured 1970ish.. Can you supply?

Question by: George Gardiner on 16 Oct 2024, 15:25

Answer:

Good morning,

Could you please contact sales@pchenderson.com with the spring dimensions and colour and we will see if we can still supply the spring?

Thanks,
P C Henderson

Answer by: Kate Donkin (Admin) on 18 Oct 2024, 07:59

Question:

Henderson — DP — no 054094. 2134mm

Springs size — length 360mm approx
diameter 20 mm

Question by: Can you supply? on 28 Nov 2024, 13:09

Answer:

Good afternoon,

Dimensions are as per the website 395mm x 20mm, if your door is 2134mm high and has a bunch of three springs either side then these should suit.

Thanks,
P C Henderson

Answer by: Kate Donkin (Admin) on 28 Nov 2024, 16:21

Question:

Good-morning.
I am looking to replace my garage door springs 2 x set of 3.
395mm long x 20mm Dia. my door height is 2006mm, year 2003. I think the above SKU:280007, will be OK
?. Could you please advise.
Thank you, Tim. 01275-474885

Question by: Tim Avery on 29 Dec 2024, 13:34

Answer:

Good morning,

SKU 280007 will work with your described application.

Thanks,
P C Henderson

Answer by: Kate Donkin (Admin) on 2 Jan 2025, 09:31

Question:

my door size is 2110 mm would these springs 395mm x20mm fit my garage door

Question by: mr Julian Adshead on 14 Jun 2025, 19:28

Answer:

Good afternoon,

These springs are 400mm, however they should be suitable for installation on the door.

Thanks,
P C Henderson

Answer by: Kate Donkin (Admin) on 16 Jun 2025, 16:18

Question:

Good afternoon
I have a door that has 3 springs either side.
The bottom retension bracket on one side has come off and I threw it away not knowing what it was until I went to open the door.
It screws to the bottom of the frame and the springs have a pag that locates in the bracket for tension.
Can't be sure of the date of manufacture, but the pre 1992 bracket don't look the same and the item was a chunky piece of galvanise metal.
Can you identify without a picture of the one side I still have?

Question by: Vaughan on 29 Aug 2025, 12:02

Answer:

Good morning,

We can no longer supply the spring brackets unfortunately. A local garage door specialist may be able to help with this.

Thanks,
P C Henderson

Answer by: Kate Donkin (Admin) on 1 Sept 2025, 10:57