Pocket Door (for single and bi-parting doors) - All Questions

Good afternoon, No - we don 't supply a fitting service for any of our products. We do however have a step by step installation video for our Pocket Door system which you can view here https://www.youtube.com/watch?v=h2A0qLkul94&t=139s" rel="nofollow ugc https://www.youtube.com/watch?v=h2A0qLkul94&t=139s . If you have any questions at all - please give our technical team a call on 0191 3777345. Thanks,   Kate   Marketing Assistant ;0

Good morning Garry, Our standard Pocket Door system only caters for applications with a minimum finished wall thickness of 120mm. Many thanks, Kate Marketing Assistant

Good afternoon,   Yes - our pocket door kit can be cut to suit non standard door sizes. Guidance on this is included in the fitting instructions.   Many thanks,   Kate   Marketing Assistant  

Good Morning, Thank you for getting in touch. The question received by the previous customer was in reference to the finished wall thickness, which for this kit is 120mm. The part of the fitting instructions you 're referring to is in reference to cutting the kit down to suit a non standard door size. In which case we advise €œKits can be reduced both in height and width to meet particular door sizes. To reduce the height of a kit cut down the uprights by the same amount, starting from the bottom of each upright. To reduce the width of the kit cut down the track and timber head assembly separately. Cut from the opening side by the difference between the kit door width and the door to be used in equal proportion. For further information contact the P.C. Henderson Technical Department. Hope this helps. Many thanks Kate   Marketing Assistant

Good Morning, The weight of the door will depend on the door material used. A standard kit can cater for an underweight door no problem but when using a soft close it 's important to choose the right weight capacity in order to get optimum performance. Hope this helps. Many thanks, Kate Marketing Assistant

Good afternoon, For double pocket door applications, butt the timber headers together and soffit fix these to the overhead lintel. Then use the bracket at the closing side of the opening as normal. This wouldn 't effect the opening height. Thanks, Kate Marketing Assistant

Good morning,For double door applications, please purchase 2 kits.Thanks,KateMarketing Assistant

Good morningWe do not supply the doors themselves, we only provide the sliding door mechanism.Many thanks,KateMarketing Executive

Good afternoon,Our Pocket Door kit can be cut down to suit non standard door sizes - steps for this are included in the fitting instructions.Thanks,KateMarketing Executive.

Hello, Thank you for the question, unfortunately we are not able to supply that information as that finish is not something we offer. Our finishing kit is the timber liner kit that we show in the instruction. You do not have to take the liner kit however, it is optional and you can finish the door anyway you like however we do not supply instructions for any other finish option except the one we supply. You can finish with plaster board to give you the flush finish you require but how it is achieved is up to your builder / joiner.   Apologies I am unable to help further   John